Harvesting mason bee cocoons is a quick and easy way to ensure a healthier Mason bee population!
But, if that wasn't enough, harvesting also allows you to:
- Take Inventory of your Mason bee population;
- Share your extra cocoons (and knowledge) with friends and neighbors; and
Note: This article details the why, when, and how of harvesting mason bee cocoons. If you've done this before and just need a quick refresher, check out our Simple Harvesting Guide - Downloadable PDF.
Why it is Important to Harvest Mason Bee Cocoons
Productive bee nests are a buffet of food resources for pests and parasites, and the proximity of managed bees to each other allows diseases to spread quickly. We've repeatedly heard from researchers and bee raisers alike that the most effective control method of Chalkbrood, pollen mites, and Houdini flies is to harvest your mason bee cocoons in the fall.
As bee raisers, it's our responsibility to provide these pollinators with healthy habitats to forage and nest. So, if you install an artificial bee house, you'll need to take the time to harvest if you want to see healthy future generations of bees in your yard. Fortunately, it's a quick and easy process!
We know not everyone takes the time to harvest each season for various reasons. Still, we want to stress the importance of, at a minimum, opening ALL your nesting materials so you can see if any disease or parasite problems need to be addressed.
While we consider washing and treating your cocoons with an antifungal solution, such as CleanBee™ or a mild bleach solution, to be best practice, we've updated our harvesting steps to make the harvesting process more accessible.
If you open all your nesting materials and don't see any evidence of pollen mites or Chalkbrood, we feel comfortable saying you can skip Step 2 - Wash Cocoons & Treat with CleanBee™. However, if you notice any evidence of pollen mites or Chalkbrood, you should definitely complete Step 2 before storing your cocoons for the winter.
Let's move on to the steps to harvesting mason bee cocoons!
Steps to Harvest Mason Bee Cocoons
WHEN: Typically, you'll want to harvest in October or November.
If you had a particularly long, hot summer, you'd want to harvest closer to October than November. Just be sure not to harvest too early, as mason bees still need summer temperatures to develop into adult bees fully.
WHAT YOU'LL NEED: Before you begin, you'll want to set up your harvesting workspace and gather your harvesting tools.
A quick note: harvesting can be a bit messy! We suggest laying down a layer of newspaper or an old sheet to make cleaning up easier and not wearing your favorite clothes.
So, what makes harvesting messy? Well, you'll find all sorts of things inside the nesting materials. As expected, you'll find healthy mason bee cocoons, mud, and mason bee frass (poop). However, you may also find Chalkbrood, pollen mites (or other parasites), pollen loaves from bee eggs that never hatched, and possibly even dead mason bee larvae. The combination makes harvesting a fascinating but messy process.
Don't be discouraged if you find any of these inside your nesting materials. We assure you that parasites and diseases are quite common! Many parasites are native predators that evolved alongside Mason bees. But that doesn't mean we have to allow them to feast on our overwintering bees!
Harvesting significantly reduces the incidences of pests, parasites, and diseases and allows managed bees to thrive year after year!
HARVESTING TOOLS: Fortunately, most of the tools we use for harvesting mason bee cocoons are everyday items you likely already have!
- Clean tubs or bowls and a colander or strainer for washing bee cocoons;
- CleanBee (or bleach) in case Chalkbrood is present;
- A reed splitter for quickly opening natural reeds or bamboo reeds (if you have them) - If you don't have a reed splitter, you can use your fingers to split open natural reeds by hand. You may want to wear a pair of thin gardening gloves to protect your fingers from getting sore.
- A Cocoon Comb for removing cocoons (for wood trays and natural reeds) - If you don't have a cocoon comb, you can use a Phillips head screwdriver, but harvesting will take longer since you can only remove cocoons one chamber at a time;
- A HumidiBee for storing clean cocoons;
- Paper towels or clean rags to pat cocoons dry after washing;
- A dry wire brush or old toothbrush to remove stuck-on debris (for wood trays); and
- Scissors to open nesting materials (for Cardboard BeeTubes and Inserts).
Step 1: Open Nesting Materials and Remove Cocoons
Wood Trays
1. Remove the green rubber bands and the cardboard backing (save both to reassemble the trays once clean).
2. Lift the first tray, and using the Cocoon Comb, gently remove cocoons, mud walls, and other debris. Keep your removal tool at a 45-degree angle (see image below).
3. Remember to check both sides of the nesting trays for cocoons.
4. Brush away any pollen mites and mason bee frass with a stiff brush or old toothbrush.
5. If you find pollen mites or Chalkbrood, make sure to complete Step 2 in this guide. You'll also want to spot clean wood trays with an old toothbrush dipped in a bleach and water solution (Ratio: 1 tsp. Bleach to 1 Cup Water). Or lightly apply Clean Bee, a safe alternative to bleach, and use the toothbrush to work the Clean Bee solution into the wood grooves. You only need to apply the Clean Bee to affected areas, not the entire tray or bee house.
6. Remove and kill all Houdini fly maggots you find while opening wood trays. We've found sealing maggots in a plastic bag and throwing the bag away works well. This method ensures they won't be able reproduce in the landfill.
7. Once clean and dry, reassemble the nesting trays by aligning the side grooves. Double-check the trays are snug and there are no gaps between the tracks.
8. Store over winter with cardboard backing and rubber bands attached to trays.
Natural Reeds
Before opening, use a Cocoon Finder to check if the reeds are partially used or if they can be set aside for next year. Insert the Cocoon Finder into the open end of the reed. If the green portion of the finder is visible, then the reed is likely partially filled with cocoons to be harvested. If the green part of the finder is not visible, then the reed is likely empty and can be reused next season.
- Pinch the mud-capped end between your fingers, and split the reed open. Don't worry; you won't harm the bees. If you have a lot of reeds to open, you'll save your fingers by wearing a pair of thin gardening gloves.
- Pry the reed apart and use a Cocoon Comb to gently remove the cocoons.
- If you find pollen mites or Chalkbrood, make sure to complete Step 2 in this guide.
- Remove and kill all Houdini fly maggots you find while opening reeds.
- Once all the cocoons have been removed, you can throw the opened reeds into the yard waste or compost bin!
Cardboard BeeTubes with Inserts
First, remove the Spring Inserts for Mason Bees from the Cardboard BeeTubes (save the cardboard tubes for next season), then choose one of the options below.
Option 1: Got lots of Inserts? Soak the inserts in warm water for 10-15 minutes to loosen the glue.
Option 2: Tear or snip one end of the Insert, and it will easily unravel. Gently use your fingers to separate mason bee cocoons from the paper.
Remember: If you find pollen mites or Chalkbrood, make sure to complete Step 2 in this guide, and remove and kill all Houdini fly maggots you find while opening BeeTubes.
Cardboard BeeTubes without Inserts
We don't recommend using BeeTubes without inserts due to parasitic wasp infestation. However, here are instructions:- Tear or snip one end of the BeeTube and unravel along the spiral.
- If a cocoon is stuck at the back end, gently push it out from the closed end using an opened paperclip.
- If you find pollen mites or Chalkbrood, make sure to complete Step 2 in this guide.
- Remove and kill all Houdini fly maggots you find while opening reeds.
Pro Tip: If you find large, chubby, or plump larvae that fill the nesting chamber or non-mason bee cocoons, these may be wild bees or beneficial wasps.
If you CAN'T open your bamboo or drilled blocks of wood, watch this video on how to transition from harmful nesting houses to healthier.
Step 2: Wash Cocoons & Treat with CleanBee™ If Needed
Mason bee cocoons are waterproof and can withstand 30 minutes of soaking, but less time is always safer.
- Fill a bowl or tub with cool water, add mason bees to the water, and gently stir to clean off mud and debris. Frass (bee poop) may require some friction to remove from the outside of the cocoon. If this occurs, gently rub cocoons between your fingers to remove stuck-on debris.
- Once cleaned of debris, remove cocoons from the water. We've found a colander or slotted spoon makes for quick and easy removal of cocoons. Gently pat the cocoons dry with paper towels or a clean towel/rag. Allow cocoons to continue to air dry for about 30 minutes.
- If you find evidence of Chalkbrood, spray Clean Bee directly on Mason bee cocoons. A light mist on all sides, is all you'll need. Alternatively, you could use a mild bleach solution (1 tsp. bleach to 1 cup of water). However, this method is more caustic, and you'll need to rinse cocoons with fresh water after spraying to remove excess bleach.
Pro Tip: Not all cocoons will be viable. Dead larvae that are C-shaped are a tell-tale sign of Chalkbrood infection and should be removed and thrown away. If you find cocoons with small holes, you may have a parasitic wasp infestation - remove and throw these out too.
Step 3: Store Cleaned Cocoons until Spring
Once clean, store mason bee cocoons in your refrigerator until the following spring. The consistent cold temperatures of your fridge help the mason bees conserve their fat stores over the winter.
We recommend setting your fridge temperature to between 34°-38° F (1°-3°C). Modern frost-free refrigerators have reduced moisture levels. After a few weeks in the fridge, your cocoons may begin to dry out. To prevent dehydration of mason bee cocoons, we've developed the Crown Bees HumidiBee Cocooon Humidifier.
Add about a tablespoon of water once a month to your HumidiBee container to keep cocoons from drying out.
Spores from cheese or foods past their prime are constantly circulating around your refrigerator, which can sometimes cause Mason bee cocoons to become moldy. You can help prevent spores from reaching your cocoons by placing the HumidBee in a paper bag. If you notice excessive mold growth (a little is OK) in your HumidiBee or on mason bee cocoons during winter storage, you can re-wash cocoons in cool water, pat dry, and spritz with Clean Bee™ to treat mold growth. Rinse the HumidiBee pads in warm, soapy water, let dry, then evenly spritz Clean Bee™ on both sides of the HumidiBee pads and Mason bee cocoons.
Take Inventory and Share Mason Bee Cocoons
We care about your mason bee-raising success and hope you harvest more mason bee cocoons than you need!
Here are a couple of easy guidelines to help you know how many mason bee cocoons to keep during harvesting:
- Keep about 1.5 mason bee cocoons per nesting tube. For example, if you have a 48-hole wood tray for Mason bees, keep about 75 cocoons. Keeping a few extra will ensure that enough healthy adult bees will emerge and nest next spring.
- Keep a minimum of 10 Mason bee cocoons per mature fruit tree.
Every yard is different and, with experience, you will get to know how many Mason bee cocoons your garden, orchard, or farm can support. Many bee raisers like to keep about 200 mason bee cocoons to raise in their backyard.
Pro Tip: If you find the majority of your nesting materials are filled early in the season, you may want to increase your number of nesting materials or add an extra mason bee house to support the busy females.
If you find yourself with extra Mason bee cocoons, share your extra mason bee cocoons (and knowledge). Spread the love!
We are proud to carry Crown Bees solitary bee cocoons and supplies. You can purchase most of the above-mentioned products in our stores.
NOTES TO MARKETING:
The downloadable harvesting guide PDF links to Crown Bees' website. If this is of concern, please download it and link to it on your website. It's a tremendous tool that greatly simplifies the harvesting process.